Oystar sells sixth flexline machine to Bakoma

12 January 2014 (Last Updated January 12th, 2014 18:30)

Packaging machines supplier Oystar has sold its sixth Flexline FL 8/8 CA machine for making Oystar Hamba preformed cups to Poland-based yoghurt products supplier Bakoma.

Pack

Packaging machines supplier Oystar has sold its sixth Flexline FL 8/8 CA machine for making Oystar Hamba preformed cups to Poland-based yoghurt products supplier Bakoma.

The fully servo-controlled machine will fill and seal preformed cups with Bakoma's milk products. It is expected to achieve a production rate of up to 38,400 cups per hour, and will produce filling quantities between 90g and 400g.

Changes in filling curves and quantities can be easily controlled through the control panel and then saved as dispensing formulas.

The machine has three different dosing devices, and all dosing equipment is designed for CIP/SIP treatment.

The foil lid stations are equipped with automated changeover devices for uninterrupted production. Adjustable sealing heads are designed to seal 16 cups per cycle. Flexline also has a ring-shaped cylinder to warm the sealing heads.

Bakoma has already put two form, fill and seal machines from Oystar Hassia into operation at its manufacturing plant outside Warsaw. Each of these machines is equipped with an attached final packaging system from Oystar A+F.


Image: Oystar has sold a new Flexline FL 8/8 CA machine to Bakoma. Photo: courtesy of Oystar.